Exterior Oil Designer Tester Kit

DEO-Ext Oil Design Kit
Kit contains all 14 colors of Exterior Oil
14 individual 9oz samples
14 Colors, which can be pre-mixed or layered for custom look
Each tester covers approximately 2-4 sqft
The WOCA Exterior Oil Designer Tester Kit contains all 14 of the Exterior Oil colors. It is the best stain for protecting and preserving all outdoor wood surfaces. It can be used on all types of outdoor wood surfaces and all wood species.

WOCA Exterior Oil Samples by Hand

  1. Dampen a clean cloth with water and wipe the sample evenly to open the wood grain and allow it to thoroughly dry.
  2. Pour a small amount of WOCA Exterior Oil onto the wood. Spread and polish the oil with a cloth or a piece of red pad. Leave the oil to soak on the sample for 5 minutes.
  3. Wipe off the surface oil with a cotton cloth. When finished, there should be no oil on top of the wood. Leave the sample to dry for 5 – 6 hours.
  4. Repeat the oil application with the white pad as in #2 & #3 above. You will use less oil than during the first application.

Instructions Download

Download Exterior Oil Tester Instructions